May 6, 2005.
At the initiative of the Kristiine District Government, wireless Internet access was established at Järve Hospital in Tallinn. The wards 360, 361, 362 on the third floor of the hospital, as well as the lounge, are located within the WiFi coverage area. Patients therefore gained the opportunity to participate in educational activities and communicate with loved ones via the Internet. The project's longer-term goal is to open the possibility of WiFi use in all hospital rehabilitation departments. Loksa Rehabilitation Center and Järve Hospital are early examples.
http://admin.wifi.ee//Dokumendid/jarveap.jpg
Practical instructions To set up a WiFi coverage area, an independent ADSL connection is required or a new network segment must be created that prevents strangers from accessing the internal network. The building's stone walls do not allow 2.4 GHz signals to pass through; therefore, a suitable location must be found on the building’s wall or ceiling for the WiFi device from where the signal can propagate through doors and windows. With the help of a mounting frame, the device can be placed in an appropriate location. A wide-beam antenna must be added to significantly improve coverage. To check coverage, the program Netstumbler is suitable. Measure the signal to noise ratio (SNR). SNR+ indicates the best obtained value. SNR indicates the current ratio, which fluctuates constantly.
If SNR > 20, the network performance is good. If SNR > 10, then network performance is average (movement of people in the room interferes with network operation). If SNR < 10, then weak so-called "wireless cards" are not operational. What questions have arisen?