June 10, 2004.
Creating a public WiFi hotspot requires experience because the WiFi service must be freely accessible, compatible with various computers and phones used by customers.
1. Finding a free channel? WiFi (2.4 GHz) operates on 11 channels, of which only channels 1, 6, and 11 are non-overlapping, transmitters on other neighboring channels interfere with each other's operation. Recently opened channels 12, 13, and 14 are not accessible with older WiFi cards. Before installing a new transmitter, find a free channel in the airwaves using Netstumbler.
http://admin.wifi.ee//Dokumendid/stumbler1.jpg
2. The location and size of the coverage area is determined by the transmitter placement. It is suitable to hide the transmitter above a suspended ceiling or behind drywall paper. Wood, gypsum board, and plastic do not obstruct the transmitter's operation, but metal, masonry, and reinforced concrete act as signal terminators.
3. A proper transmitter can be equipped with an external antenna; the antenna cable length should be measured in centimeters, as high-frequency signals attenuate quickly in the cable. It is suitable to install the transmitter on one side of a concrete wall, and the external antenna on the opposite side. For multiple buildings, it is appropriate to use an omni-directional antenna (radiates evenly in all directions), placed in a well-visible location.
4. Use devices with verified compatibility. Wi-Fi certification is an advantage; otherwise, a seller’s guarantee for device replacement is necessary if compatibility problems arise. WiFi phones, radios, players, and other added devices make compatibility checks critical. The price difference between WiFi certified and non-certified devices is minimal. (In June 2004, a WiFi certified transmitter Linksys WRT 54G and a 9 dB omni antenna cost less than 2000 kroons.) Using the cheapest devices can cause the network to become inoperable due to power or Internet outages. For various reasons, more than 10% of new WiFi hotspots have required transmitter reconfiguration or replacement.