July 19, 2004.
The following pictures illustrate various projects where "the village smith has bridged the Internet to his farm". Necessary are: 1. Line of sight between antennas. 2. A neighbor, municipality, or company sharing ISP service. 3. A shared WiFi router with reliable software and adjustable output power. (Wi-Fi compatibility, remote administration capabilities, user authentication, and profiles)
Building the network together is cheaper, so it is worthwhile to start the project by gathering interested parties. Contact your municipality. If the residents' concerns do not interest the municipal leader, then the entire project must be carried out independently, starting with the creation of a non-profit organization. The transmitter broadcasting Internet into the air is shared; the client device is purchased and installed independently by the homeowner. Specific examples:
1. A farm chimney acting as an ISP service intermediary in Virumaa. This chimney receives ISP connection at a 15 km distance from an EMT mast and shares the connection within a 500 m radius to neighbors. In use are a 2.4 GHz bridge + large antenna and a 2.4 GHz AP + small antenna.
http://admin.wifi.ee//Dokumendid/3-korstnake.jpg
2. Internet-sharing post at Meosemägi, Valga County. The electrical panel located on the post has been converted into a weatherproof equipment box. The bridge inside the equipment box receives ISP connection with a panel antenna from the village information center, and the transmitter shares the ISP connection using a ring antenna to 7 farms located at the foot of the hill.
http://admin.wifi.ee//Dokumendid/IMG_0097.jpg
3. Client device suitable as a bridge is the configured transmitter Linksys WRT 54G, shown in the picture with a parabolic antenna. The connection is transmitted to the ground via a WiFi transmitter + white omni antenna. As a post, a spruce trunk is used in the farmyard, driven into the ground at one end and guyed with wires.